The Tyco 516.800.531 801CHEx is an Intrinsically Safe Carbon Monoxide plus Heat Detector, which plugs into the Tyco 5BEx Base.
The Tyco 516.800.531 801CHEx is designed to transmit digital signals, which represent the status of the Carbon Monoxide and heat elements of the detector, to a remote T2000 Fire Controller.
Software within the controller is used to interpret the returned Carbon Monoxide and heat values to raise an alarm or other appropriate responses according to the type of detector configured in ‘MX CONSYS’. Maybe used in dusty environments instead of the 801PHEx Detector the mode of detector may be:
Heat only detector (A1R or A2S) (no sensitivity selection)
Compensated Carbon Monoxide detector (sensitivity: High, Normal or Low)
Compensated Carbon Monoxide detector (sensitivity: High, Normal or Low)combined with heat (A1R) Carbon Monoxide Detector (sensitivity: High, Normal or Low)
Features
ATEX/IECEX certified intrinsically safe Ex II1GD
Higher reliability through the use of galvanic barriers
Lower cost system design and installation as one type of detector can be used throughout,coupled with a full range of devices
Enhanced safety in Accommodation areas
Provides the designer with greater flexibility in protecting hazardous areas
Suitable for use in Zone 0, Zone 1, Zone 2, Zone 20, Zone 21 and Zone 22
Complies to EN54-7 for Smoke Detectors, EN54-5 for Heat Detectors, EN54-11 for Call Points and EN54-18 for I/O Devices
